LS-2003 Manual (Return
to LS-2003 Home)
The leak simulation
procedures and hardware described in the LS-2003 manual were developed
by Ken Wilcox Associates, Inc. for the purpose of providing a standard
method for testing pipeline leak detectors at commercial retail
fuel stations. It is based on equipment manufactured by KWA, Inc.
It has been our
experience that the testing of leak detectors may vary significantly
from tester to tester because of inherent limitations in the hardware
that can produce unexpected effects on the induced leak rates. This
method removes the most serious problems of this nature by providing
a standard set of equipment and procedures that are user friendly
and technically correct.
Manual available from KWA upon request.
|